Tank Rinse Dilution

Posted on

About Tom Wolf (Nozzle_Guy)

Tom Wolf is based in Saskatoon, SK and has 35 years research experience in the spraying business. He obtained his BSA (1987) and M.Sc. (1991) in Plant Science at the University of Manitoba, and his Ph.D. (1996) in Agronomy from the Ohio State University. Tom focuses on practical advice that is research-based to improve the efficiency of producers.

See all posts by Tom Wolf (Nozzle_Guy).

If you have a limited amount of clean water to rinse your sprayer, this app can help you decide how to make the best use of it.  Simple enter two values – the amount of pesticide remaining in your tank sump (including the suction line to the pump and the return line to the tank), and the amount of clean water you want to add.  The units (gal, L) are not important as long as they are the same for both entries.

The app allows you to calculate the dilution power of up to 5 sequential rinses.

Tank Dilution

Author

  • Tom Wolf is based in Saskatoon, SK and has 35 years research experience in the spraying business. He obtained his BSA (1987) and M.Sc. (1991) in Plant Science at the University of Manitoba, and his Ph.D. (1996) in Agronomy from the Ohio State University. Tom focuses on practical advice that is research-based to improve the efficiency of producers.

    View all posts

4 thoughts on “Tank Rinse Dilution

Comments are closed.